Skip to content

Winter 2026 Streaming windows now = black mould by January. Stop condensation in 9 steps

Vaillant F29 Fault Code: Flame Loss Causes and How to Fix It

F29 means your Vaillant boiler lit, then lost its flame. The causes, from a prepayment meter running low to a frozen condensate pipe, and what you can safely check.

Alex Morgan avatar
Founder & editor
Published 6 min read
White wall-mounted combi boiler in a cold British kitchen with its display glowing on a frosty winter morning

F29 (or F.29) on a Vaillant boiler means "flame loss": the burner lit, then the flame went out while the boiler was running and it couldn't relight. The most common causes are a gas supply problem (a prepayment meter running out, low gas pressure or a partly closed valve), a frozen or blocked condensate pipe in cold weather, and a dirty or worn flame sensing electrode. Check the gas and the condensate pipe, then press reset once. If F29 comes back, call a Gas Safe engineer.

F29 is the close cousin of F28. F28 means the boiler never managed to light; F29 means it lit but lost the flame. The checks are much the same. Glow-worm boilers, made by the same group, use similar codes. For every other code, see our Vaillant fault codes list, and more help is on our heating hub.

What F29 means

When there's a demand for heat or hot water, a Vaillant boiler opens the gas valve, sparks the ignition electrode and lights the burner. A flame sensor then keeps checking the flame is still there. If the flame disappears while the boiler is running, the boiler tries to relight. If it can't, it locks out and shows F29.

CodeMeaningWhen it happens
F28Ignition failure on start-upThe boiler never lit
F29Flame loss while runningThe boiler lit, then the flame went out

Is F29 dangerous?

The lockout itself is a safety feature: it stops gas flowing with no flame. The code doesn't mean there's a gas leak.

If you smell gas, don't reset the boiler or use switches. Call the National Gas Emergency number on 0800 111 999, turn off the gas at the meter if it's safe, and open doors and windows.

The most common causes of F29

1. A gas supply problem

The flame needs a steady gas supply. Anything that starves it mid-run can cause F29:

  • A prepayment meter running out of credit or emergency credit. This is one of the most common causes. The boiler lights, then the supply cuts out.
  • Low gas pressure, for example when several gas appliances are on at once, or a problem on the supply.
  • A gas valve at the meter not fully open. The handle should be in line with the pipe.
  • Air in the gas pipe after work on the meter or in the street.

Check whether your gas hob lights and stays lit with a strong, steady flame. If the hob is weak or flickery too, the problem is the supply, not the boiler. Contact your gas supplier, or the gas network if it's a wider issue.

2. A frozen or blocked condensate pipe

Condensing boilers drain acidic water through a plastic pipe (usually white or grey) that often runs outside to a drain. In freezing weather, it can ice up. Water backs up inside the boiler and it shuts down, sometimes showing F29 or F28. You may hear gurgling from the boiler first. This is very common in a cold snap.

Hand pouring warm water from a jug over a frosty white condensate pipe outside
Thaw a frozen condensate pipe with warm, never boiling, water.

To thaw it: pour warm (not boiling) water from a kettle that's cooled down, or hold a hot water bottle, along the outside section, especially at bends and the open end. Then press reset. Boiling water can crack the plastic. Our L2 boiler code guide covers condensate pipes in more detail, including how to stop them freezing again.

3. A dirty or worn flame sensing electrode

The boiler knows the flame is there because a sensing electrode detects it. If the electrode is dirty, worn or out of position, the boiler can wrongly decide the flame has gone and lock out. This is an engineer job: it's behind the sealed casing.

4. Flue problems

A blocked or damaged flue, or strong wind blowing back into a badly placed flue terminal, can disturb the flame. Check from outside that nothing is covering the flue terminal (bird nests, bags, ivy, snow). Don't take the flue apart yourself.

5. Gas valve, fan or PCB faults

Less common, but a failing gas valve, fan or circuit board can cause flame loss. All are Gas Safe engineer jobs.

How to reset a Vaillant boiler after F29

  1. Check your gas supply first (hob, prepayment meter, meter valve).
  2. In cold weather, check and thaw the condensate pipe.
  3. Look outside to make sure the flue terminal isn't blocked.
  4. Press the reset button on the boiler (on many ecoTEC models, it's a button marked with a reset symbol, or you hold a button for a few seconds; check your user guide).
  5. Wait a few minutes to see if the boiler fires and stays lit.
Finger pressing the reset button on the front of a white combi boiler
Reset once or twice at most. If F29 keeps coming back, the boiler needs an engineer.

Reset once or twice at most. If F29 keeps returning, something is causing it, and repeated resets won't fix it.

Note down when F29 happens: only in frost, only on hot water, only when the oven is on, or at random. That pattern helps an engineer find the cause quickly.

When to call a Gas Safe engineer

Call one if:

  • F29 comes back after a reset
  • your gas supply and condensate pipe are fine
  • you hear unusual noises, see soot, or the flame looks yellow (if you can see it)
  • the boiler is overdue a service

Typical fixes include cleaning or replacing the electrode, checking the gas pressure at the boiler, and checking the flue and gas valve. Many are quick jobs. Our guide to boiler banging noises covers other symptoms worth mentioning to the engineer.

How to stop F29 coming back

  • Keep prepayment credit topped up, especially in winter.
  • Insulate the outside condensate pipe with waterproof lagging, or ask an engineer to reroute it inside or upsize it.
  • Get an annual service. Electrodes, burners and flues are checked and cleaned.
  • Keep the flue terminal clear of plants and anything that could block it.

FAQs

What does F29 mean on a Vaillant boiler?

Flame loss: the boiler lit but the flame went out while it was running, and it couldn't relight, so it locked out.

How do I fix F29 on my Vaillant boiler?

Check the gas supply and prepayment credit, thaw the condensate pipe if it's frozen, check the flue terminal is clear, then press reset once. If it returns, call a Gas Safe engineer.

What's the difference between F28 and F29?

F28 is ignition failure (it never lit); F29 is flame loss (it lit, then went out). Many causes overlap.

Can a frozen condensate pipe cause F29?

Yes. Water backing up into the boiler can make it shut down. Thaw the pipe with warm water, then reset.

Can low gas pressure cause F29?

Yes. Low or interrupted gas pressure is one of the main causes, including a prepayment meter running out.

How many times can I reset my boiler after F29?

Once or twice. If the code keeps coming back, stop and call a Gas Safe engineer.

  • F29 = flame lost while running; F28 = never lit.
  • Check gas supply and prepayment credit first.
  • In winter, thaw the condensate pipe with warm, not boiling, water.
  • Reset once or twice only, then call a Gas Safe engineer.
  • An annual service and an insulated condensate pipe prevent most repeats.

Was this guide helpful?

Alex Morgan avatar

Written by

How we research and fact-check our guides